Honda Accord 2008 Manual page 258

07/11/02 09:10:03 61TA0000_070_0033
7. If the engine is still in the vehicle, do steps 8
through 24.
8. Lower the transmission jack from the transmission.
9. A/T model: Install the shift cable cover (see page
14-282).
10. Tighten the nuts securing the lower transmission
mount (see step 25 on page 5-16).
11. Install a new set ring on the end of driveshaft, then
install the driveshaft. Make sure the ring ''clicks''
into place in the differential.
12. Install the left side damper fork (see step 3 on page
18-21).
13. Connect the lower arm to the left side knuckle (see
step 5 on page 18-21).
14. Install the splash shield (see step 48 on page 5-20).
15. Install the left front wheel.
16. Lower the vehicle on the lift.
17. Tighten the upper transmission mount bracket
mounting bolts to the specified torque.
M/T model
12 x 1.25 mm
59 N·m
(6.0 kgf·m, 43 lbf·ft)
Replace.
A/T model
12 x 1.25 mm
59 N·m (6.0 kgf·m, 43 lbf·ft)
Replace.
＊０４
＊０５
(cont'd)
7-33