Honda Accord 2008 Manual page 287

07/11/02 09:11:43 61TA0000_080_0026
Engine Lubrication
Oil Pump Chain Replacement (cont'd)
4. Install the oil pump sprocket (A) and oil pump chain
guide (B).
＊０８
5. Align the punch mark (A) on the oil pump chain
sprocket with the mid point of the (2) colored link
plates (B) of the oil pump chain, as shown below.
＊０９
A
B
6. Turn the oil pump chain auto-tensioner (C)
counterclockwise, then install the upper oil pump
chain auto-tensioner bolt (D), and tighten the lower
oil pump chain auto-tensioner bolt (E).
8-26
8 x 1.25 mm
B
22 N·m
(2.2 kgf·m,
16 lbf·ft)
A
10 x 1.25 mm
44 N·m
(4.5 kgf·m,
33 lbf·ft)
C
D
6 x 1.0 mm
12 N·m
(1.2 kgf·m,
8.7 lbf·ft)
E
6 x 1.0 mm
12 N·m
(1.2 kgf·m, 8.7 lbf·ft)
7. Remove the 3.0 mm (0.1 in.) diameter pin (A) from
the oil pump chain auto-tensioner.
8. Install the cam chain:
• All models except PZEV (see page 6-15)
• PZEV model (see page 6-66)
9. Remove the wood block and the jack.
10. Install the oil pan (see page 7-32).
11. Install the drive belt (see page 4-31).
A
＊１０