Fan, Fan Motor, And Shroud Removal And Installation - Honda Accord 2008 Manual

Hide thumbs Also See for Accord 2008:

Table of Contents

07/11/02 09:13:51 61TA0000_100_0014

Cooling System

Fan, Fan Motor, and Shroud Removal and Installation

1. Do the battery removal procedure (see page 22-90).

2. Remove the harness clamps, then remove the

battery base (see step 7 on page 5-3).

3. Remove the front grille cover:

• 2-door (see page 20-255)

• 4-door (see page 20-255)

4. Remove the water separator (A) and the intake air

5. Remove the coolant reservoir.

6. Disconnect the fan motor connectors (A), then

remove the harness clamp (B).

7. Remove the A/C condenser fan shroud assembly

(A), then remove the radiator fan shroud assembly

NOTE: Move the radiator fan shroud assembly

toward the right side of the vehicle to allow enough

space to lift it up and away from the A/C condensor

fan shroud assembly.

ＴＡ０８ＡＥ４Ａ１４４２６１１２０３１ＫＤＡＴ００

Table of Contents