Reinstalling T4000 Front Fan Trays; Figure 59: Reinstalling An Fpc - Juniper T4000 Hardware Manual

Reinstalling T4000 Front Fan Trays

Copyright © 2013, Juniper Networks, Inc.

Figure 59: Reinstalling an FPC

T-1 60 0 FP C4
To reinstall the front fan trays (see
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
1.
the strap to an approved site ESD grounding point. See the instructions for your site.
Grasp one of the fan trays by its handles, and insert it straight into the chassis.
2.
Tighten the captive screw on each side of the fan tray faceplate to secure it in the
3.
chassis.
Repeat the procedure to reinstall the remaining fan tray.
4.
Chapter 10: Installing the T4000 Router Without a Mechanical Lift
Figure 60 on page 108 and Figure 61 on page 108):
107