D-Link DAS-3636 Cli Reference Manual page 294

config traffic trap
Purpose Used to configure the trap settings for the packet storm control mechanism.
Syntax config traffic trap [none | storm_occurred | storm_cleared | both]
Description This command will configure how packet storm control trap messages will be used when a
packet storm is detected by the Switch. This function can only be used for the software traffic
storm control mechanism (when the action field in the config traffic storm_control
command is set as shutdown).
Parameters none – No notification will be generated or sent when a packet storm control is detected by
the Switch.
storm _occurred – A notification will be generated and sent when a packet storm has been
detected by the Switch.
storm_cleared − A notification will be generated and sent when a packet storm has been
cleared by the Switch.
both − A notification will be generated and sent when a packet storm has been detected and
cleared by the Switch.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To configure notifications to be sent when a packet storm control has been detected and cleared by the Switch.
DAS-3626:admin# config traffic trap both
Command: config traffic trap both
Success.
DAS-3626:admin#
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
289