D-Link DAS-3636 Cli Reference Manual page 272

show cfm mipccm
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the MIPCCM database entries:
DAS-3626:admin#show cfm mipccm
Command: show cfm mipccm
MA VID
---------- ----
opma 1
opma 1
Total: 2
DAS-3626:admin#
cfm linktrace
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create a CFM linktrace:
DAS-3600-12:4#cfm linktrace 00-01-02-03-04-05 mep mep1
Command: cfm linktrace 00-01-02-03-04-05 mep mep1
Transaction ID: 26
Success.
DAS-3600-12:4#
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
This command is used to show MIPCCM database entries.
show cfm mipccm
This command is used to display all entries in the MIPCCM. The MIPCCM entry is simlar to
FDB which keeps the forwarding port information for a MAC entry.
None.
None.
MAC Address
-----------------
00-01-02-03-04-05
00-01-02-03-04-05
This command is used to issue a CFM linktrack message.
cfm linktrace <macaddr> [mepname <string 32> | mepid <int 1-8191> md <string 22>
ma <string 22>] {ttl <int 2-255> | pdu_priority <int 0-7>}
This command is used to issue a CFM linktrack message.
<macaddr> – Specifies the destination MAC address.
mepname – Specifies the MEP name.
mepid – Specifies the MEP MEPID.
md – Specifies the maintenance domain name.
ma – Specifies the maintenance association name.
ttl – Specifies the linktrace message TTL value. The default value is 64.
pdu_priority – The 802.1p priority to be set in the transmitted LTM. If not specified, it uses the
same priority as CCMs sent by the MA.
None.
Port
-----
2
3
267