The MLD Multicast VLAN commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in
the following table.
Command
create mld_snooping multicast_vlan
config mld_snooping multicast_vlan
create mld_snooping
multicast_vlan_group_profile
config mld_snooping
multicast_vlan_group_profile
delete mld_snooping
multicast_vlan_group_profile
show mld_snooping
multicast_vlan_group_profile
config mld_snooping
multicast_vlan_group
show mld_snooping
multicast_vlan_group
delete mld_snooping multicat_vlan
enable mld_snooping multicast_vlan
disable mld_snooping multicast_vlan
show mld_snooping multicast_vlan
config mld_snooping multicast_vlan
forward_unmatched
Each command is listed, in detail, in the following sections.
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Parameters
<vlan_name 32> <vlanid 2-4094>
<vlan_name 32> {[add|delete] [member_port <portlist> | tag_member_port
<portlist> | source_port <portlist>] |state [enable | disable] |
replace_source_ip <ipv6addr>}
<profile_name 1-32>
<profile_name 1-32> [add | delete] <mcastv6_address_list>
[profile_name <profile_name 1-32> |all]
{<profile_name 1-32>}
<vlan_name 32> [add | delete] profile_name <profile_name 1-32>
{< vlan_name 32> }
<vlan_name 32>
{<vlan_name 32>}
[disable | enable]
MLD M
ULTICAST
183
22
VLAN C
OMMANDS