Table of Contents
Advertisement
Example usage:
To configure a Syslog host:
DAS-3626:admin#config syslog host 1 severity all
Command: config syslog host 1 severity all
Success.
DAS-3626:admin#
Example usage:
To configure a syslog host for all hosts:
DAS-3626:admin#config syslog host all severity all
Command: config syslog host all severity all
Success.
DAS-3626:admin#
delete syslog host
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete a previously configured syslog host:
DAS-3626:admin#delete syslog host 4
Command: delete syslog host 4
Success.
DAS-3626:admin#
show syslog host
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Used to remove a syslog host that has been previously configured, from the Switch.
delete syslog host [<index 1-4> | all]
This command is used to remove a syslog host that has been previously configured from the
Switch.
<index 1-4> − Specifies that the command will be applied to an index of hosts. There are four
available indexes, numbered 1 through 4.
all − Specifies that the command will be applied to all hosts.
Only Administrator and Operator-level users can issue this command.
Used to display the syslog hosts currently configured on the Switch.
show syslog host {<index 1-4>}
This command is used to display the syslog hosts that are currently configured on the Switch.
<index 1-4> − Specifies that the command will be applied to an index of hosts. There are four
available indexes, numbered 1 through 4.
None.
461
Advertisement
Table of Contents
