D-Link DAS-3636 Cli Reference Manual page 201

Example usage:
To show MLD snooping on the switch:
DAS-3626:admin#show mld_snooping
Command: show mld_snooping
MLD Snooping Global State
Data Driven Learning Max Entries
VLAN Name
Query Interval
Max Response Time
Robustness Value
Last Listener Query Interval
Querier State
Querier Role
Querier IP
Querier Expiry Time
State
Fast Done
Report Suppression
Rate Limit
Version
Data Driven Learning State
Data Driven Learning Aged Out : Disable
Data Driven Group Expiry Time : 260
Total Entries: 1
DAS-3626:admin#
show mld_snooping group
Purpose
Syntax
Description
Parameters
Restrictions
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
: default
: 125
: 10
: 2
: 1
: Disable
: Non-Querier
:
: 0 secs
: Disable
: Disable
: Enable
: No Limitation
: 2
: Enable
Used to display the current MLD snooping group configuration on the switch.
show mld_snooping group {[vlan <vlan_name 32> | vlanid <vidlist> | ports <portlist>]
{<ipv6addr>}} {data_driven}
This command is used to display the current MLD snooping group configuration on the
switch.
vlan_name − The name of the VLAN for which you want to view the MLD snooping
configuration.
vlanid_list − The VIDs of the VLAN for which you want to view the MLD snooping group
configuration.
portlist − The list of the ports for which you want to view the MLD snooping group
configuration.
<ipv6addr> − To view the information of this specified group.
data_driven − To view the groups learnt by data driven only.
If no parameter is specified, the system will display all current MLD snooping groups.
None.
: Disabled
: 128
196