DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
delete authen server_host
Purpose
Used to delete a user-defined authentication server host.
Syntax
delete authen server_host <ipaddr> protocol [tacacs | xtacacs | tacacs+ | radius]
Description
This command is used to delete a user-defined authentication server host previously created
on the Switch.
server_host <ipaddr> − The IP address of the remote server host to be deleted.
Parameters
protocol – The protocol used by the server host the user wishes to delete. The user may
choose one of the following:
•
tacacs – Enter this parameter if the server host utilizes the TACACS protocol.
•
xtacacs − Enter this parameter if the server host utilizes the XTACACS protocol.
•
tacacs+ − Enter this parameter if the server host utilizes the TACACS+ protocol.
•
radius − Enter this parameter if the server host utilizes the RADIUS protocol.
376