Show Stp Ports - D-Link DAS-3636 Cli Reference Manual

Status 3 : STP enabled for MSTP
DAS-3626:admin#show stp
Command: show stp
STP Bridge Global Settings
---------------------------
STP Status
STP Version
Max Age
Forward Delay
Max Hops
TX Hold Count
Forwarding BPDU
NNI BPDU Address
DAS-3626:admin#

show stp ports

Purpose Used to display the Switch's current STP ports configuration.
Syntax show stp ports <portlist>
Description This command displays the STP ports settings for a specified port or group of ports (one port at a
time).
<portlist> − Specifies a port or range of ports to be viewed. Information for a single port is displayed.
Parameters
If no ports are specified the STP information for port 1 will be displayed. Users may use the Space
bar, p and n keys to view information for the remaining ports.
Restrictions None.
Example usage:
To show STP ports information for port 1 (STP enabled on Switch):
DAS-3626:admin#show stp ports
Command: show stp ports
MSTP Port Information
----------------------
Port Index : 1
External PathCost : 1
Port RestrictedRole : False,
Port Forward BPDU : Enabled
MSTI Designated Bridge
----- ------------------ ----------------- ---- --------- ----------
0 N/A
1 N/A
2 N/A
DAS-3626:admin#
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
: Enabled
: MSTP
: 18
: 15
: 15
: 6
: Disabled
: dot1d
, Hello Time: 2 /2 , Port STP : Enabled
, Edge Port : False/No , P2P : Auto /Yes
Port RestrictedTCN : False
Internal PathCost Prio Status
20000
200000
200000
128 Disabled Disabled
128 Disabled Disabled
128 Disabled Disabled
244
,
Role