D-Link DAS-3636 Cli Reference Manual page 96

show snmp view
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display SNMP view configuration:
DAS-3626:admin#show snmp view
Command: show snmp view
Vacm View Table Settings
View Name
-------------------
restricted
restricted
restricted
restricted
restricted
CommunityView
CommunityView
CommunityView
Total Entries: 8
DAS-3626:admin#
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Used to display an SNMP view previously created on the Switch.
show snmp view {<view_name 32>}
This command is used to display an SNMP view previously created on the Switch.
<view_name 32> − An alphanumeric string of up to 32 characters that identifies the SNMP
view that will be displayed.
None.
Subtree
----------------------------------
1.3.6.1.2.1.1
1.3.6.1.2.1.11
1.3.6.1.6.3.10.2.1
1.3.6.1.6.3.11.2.1
1.3.6.1.6.3.15.1.1
1
1.3.6.1.6.3
1.3.6.1.6.3.1
View Type
----------
Included
Included
Included
Included
Included
Included
Excluded
Included
91