D-Link DAS-3636 Cli Reference Manual page 157

show qinq
Purpose Used to show global Q-in-Q.
Syntax show qinq
Description This command is used to show the global Q-in-Q status.
Parameters None.
Restrictions None.
Example usage:
To show global Q-in-Q status:
DAS-3626:admin#sh qinq
Command: show qinq
QinQ Status : Enabled
====================================================
SPVID : 1
VLAN Name : default
TPID : 0x8100
Uplink ports :
Access ports : 1-18
Priority : None
----------------------------------------------------
SPVID : 2
VLAN Name : v2
TPID : 0x88a8
Uplink ports : 17-18
Access ports : 1
Priority : None
----------------------------------------------------
Total Entries: 2
DAS-3626:admin#
create qinq
Purpose Used to create Q-in-Q.
Syntax create qinq <vlan_name 32> spvid <vlanid 1-4094> {tpid <hex 0x0-0xffff>}
Description This command is used to create the Q-in-Q configuration for a vlan, include:
SPVID and TPID.
Parameters <vlan_name 32> − Specifies a VLAN name.
<vlanid 1-4094> − Specifies a VLAN ID.
{tpid <hex 0x0-0xffff>} − Specifies a TPID. If no parameter specified, TPID is 0x88A8.
information.
Restrictions None.
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
152