D-Link DAS-3636 Cli Reference Manual page 102

Example usage:
To display the currently entered SNMP community strings:
DAS-3626:admin#show snmp community
Command: show snmp community
SNMP Community Table
Community Name
-------------- -----------
dlink
private
public
Total Entries: 3
DAS-3626:admin#
config snmp engineID
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To give the SNMP agent on the Switch the name "0035636666":
DAS-3626:admin#config snmp engineID 0035636666
Command: config snmp engineID 0035636666
Success.
DAS-3626:admin#
show snmp engineID
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the current name of the SNMP engine on the Switch:
DAS-3626:admin#show snmp engineID
Command: show snmp engineID
SNMP Engine ID : 800000ab03000102030400
DAS-3626:admin#
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
View Name Access Right
------------
ReadView read_write
CommunityView read_write
CommunityView read_only
Used to configure a name for the SNMP engine on the Switch.
config snmp engineID <snmp_engineID 10-64>
This command is used to configure a name for the SNMP engine on the Switch.
<config snmp_engineID> − An alphanumeric string that will be used to identify the SNMP
engine on the Switch.
Only Administrator-level users can issue this command.
Used to display the identification of the SNMP engine on the Switch.
show snmp engineID
This command is used to display the identification of the SNMP engine on the Switch.
None.
None.
97