Table of Contents
Advertisement
Example usage:
To display the extensive NetBIOS filter status:
DAS-3626:admin#show filter netbios
Command: show filter netbios
Enabled Ports: 1-3
DAS-3626:admin#
config filter extensive_netbios
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the extensive NetBIOS state::
DAS-3626:admin#config filter extensive_netbios 1-10 state enable
Command: config filter extensive_netbios 1-10 state enable
Success.
DAS-3626:admin#
show filter extensive_netbios
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the extensive NetBIOS filter status:
DAS-3626:admin#show filter extensive_netbios
Command: show filter extensive_netbios
Enabled Ports: 1-3
DAS-3626:admin#
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Used to configure the switch to filter 802.3 frame NetBIOS packets from specified ports.
config filter extensive_netbios [<portlist>|all] state [enable|disable]
This command will configure the switch to filter 802.3 frame NetBIOS packets from the
specified ports.
[<portlist>|all] – The list of port numbers to which the NetBIOS filter will be applied.
state [enable|disable] – Used to enable/disable the NetBIOS filter on the switch.
Only Administrator-level users can issue this command.
Enabling the NetBIOS filter will create one access profile and one access rules per port
(DSAP=F0, SASP=F0).
Used to display the switch settings to filter NetBIOS packets from specified ports.
show filter extensive_netbios
This command will display the switch settings to filter NetBIOS packets from the specified
ports.
None.
Only Administrator-level users can issue this command.
395
Advertisement
Table of Contents
