Table of Contents
Advertisement
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
config stp mst_config_id
Purpose
Used to update the MSTP configuration identification.
Syntax
config stp mst_config_id {revision_level <int 0-65535> | name <string 32>}
Description
This command will uniquely identify the MSTP configuration currently configured on the
Switch. Information entered here will be attached to BPDU packets as an identifier for the
MSTP region to which it belongs. Switches having the same revision_level and name will be
considered as part of the same MSTP region.
Parameters
revision_level <int 0-65535>– Enter a number between 0 and 65535 to identify the MSTP
region. This value, along with the name will identify the MSTP region configured on the
Switch. The default setting is 0.
name <string> − Enter an alphanumeric string of up to 32 characters to uniquely identify the
MSTP region on the Switch. This name, along with the revision_level value will identify the
MSTP region configured on the Switch. If no name is entered, the default name will be the
MAC address of the device.
236
Advertisement
Table of Contents
