D-Link DAS-3636 Cli Reference Manual page 123

DAS-3626:admin#config snmp system_location HQ 5F
Command: config snmp system_location HQ 5F
Success.
DAS-3626:admin#
config snmp system_name
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the Switch name for "DAS-3600-12 Switch
DAS-3626:admin#config snmp system_name DAS-3600-12 Switch
Command: config snmp system_name DAS-3600-12 Switch
Success.
DAS-3626:admin#
enable snmp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable snmp on the Switch
DAS-3626:admin#enable snmp
Command: enable snmp
Success.
DAS-3626:admin#
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Used to configure the name for the Switch.
config snmp system_name <sw_name>
This command is used to configure the name of the Switch.
<sw_name> − A maximum of 255 characters is allowed. A NULL string is accepted if no
name is desired.
Only Administrator and Operator-level users can issue this command.
Used to enable the SNMP interface access function.
enable snmp
This command is used to enable the SNMP function.
None.
Only Administrator and Operator-level users can issue this command.
:
":
118