D-Link DAS-3636 Cli Reference Manual page 126

show sntp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display SNTP configuration information:
DAS-3626:admin#show sntp
Command: show sntp
Current Time Source
SNTP
SNTP Primary Server
SNTP Secondary Server
SNTP Poll Interval
DAS-3626:admin#
enable sntp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable the SNTP function:
DAS-3626:admin#enable sntp
Command: enable sntp
Success.
DAS-3626:admin#
disable sntp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Used to display the SNTP information.
show sntp
This command will display SNTP settings information including the source IP address, time
and poll interval.
None.
None.
: System Clock
: Disabled
: 10.1.1.1
: 10.1.1.2
: 30 sec
To enable SNTP server support.
enable sntp
This command will enable SNTP support. SNTP service must be separately configured (see
config sntp). Enabling and configuring SNTP support will override any manually configured
system time settings.
None.
Only Administrator and Operator-level users can issue this command. SNTP settings must be
configured for SNTP to function (config sntp).
To disable SNTP server support.
disable sntp
This command will disable SNTP support. SNTP service must be separately configured (see
config sntp).
None.
Only Administrator and Operator-level users can issue this command.
121