Modify Banner And Prompt Commands - D-Link DAS-3636 Cli Reference Manual

Administrator level users can modify the login banner (greeting message) and command prompt by using the commands described
below.
Command
config command_ prompt
config greeting_message
show greeting_message
The modify Banner and Prompt commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table.
config command prompt
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To modify the command prompt to "AtYourService":
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Parameters
[<string 16> | username | default]
{default}
Used to configure the command prompt.
config command_prompt [<string 16> | username | default]
This command is for users to change the command prompt.
string 16 –The command prompt can be changed by entering a new name of no more that 16
characters.
username – The command prompt will be changed to the login username.
default – The command prompt will reset to factory default command prompt.
Only Administrator and Operator-level users can issue this command. Other restrictions
include:
•
If the "reset" command is executed, the modified command prompt will remain
modified. However, the "reset config/reset system" command will reset the
command prompt to the original factory banner.
M B
ODIFY ANNER AND
28
P C
ROMPT OMMANDS
5