D-Link DAS-3636 Cli Reference Manual page 184

enable/disable igmp_snooping multicast_vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable IGMP Multicast VLAN:
DAS-3626:admin#enable igmp_snooping multicast_vlan
Command: enable igmp_snooping multicast_vlan
Success.
DAS-3626:admin#
show igmp_snooping multicast_vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display IGMP Multicast VLAN:
DAS-3626:admin#show igmp_snooping multicast_vlan
Command: show igmp_snooping multicast_vlan
IGMP Multicast VLAN Global State
VLAN Name
VID
Member(Untagged) Ports
Tagged Member Ports
Source Ports
Status
Replace Source IP
Total Entry: 1
DAS-3626:admin#
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Used to enable/disable the IGMP Multicast VLAN function.
enable igmp_snooping multicast_vlan
disable igmp_snooping multicast_vlan
This command controls the IGMP Multicast VLAN function. The IGMP Multicast VLAN will
take effect when igmp snooping multicast vlan is enabled. By default, the IGMP Multicast
VLAN is in a disabled state.
None.
Only Administrator and Operator-level users can issue this command.
Used to show the information of IGMP Multicast VLAN.
show igmp_snooping multicast_vlan {<vlan_name 32>}
This command allows you to show the information of IGMP Multicast VLAN.
<vlan_name> − The name of the multicast VLAN to be shown.
None.
: RG
: 11
: 4-5
:
:
: Enabled
: 0.0.0.0
: Enabled
179