D-Link DAS-3636 Cli Reference Manual page 214

Example usage:
To disable loop-back detection on the switch:
DAS-3626:admin#disable loopdetect
Command: disable loopdetect
Success
DAS-3626:admin#
show loopdetect
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show loop-detect:
DAS-3626:admin#show loopdetect
Command: show loopdetect
LBD Global Settings
---------------------------
LBD Status
LBD Mode
LBD Interval
LBD Recover Time
LBD Trap Status
DAS-3626:admin#
show loopdetect ports
Purpose
Syntax
Description
Parameters
Restrictions
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Used to display the current loop-back detection settings on the switch.
show loopdetect
This command is used to display the current loop-back detection settings on the switch.
None.
None.
: Disabled
: Port_based
: 10
: 60
: None
Used to display the current per-port loop-back detection settings on the switch.
show loopdetect ports [all | <portlist>]
This command is used to display the current per-port loop-back detection settings on the
switch.
<portlist> − Specifies a range of ports for the loop-back detection
all − Specifies all ports for the loop-back detection.
None.
209