D-Link DAS-3636 Cli Reference Manual page 411

show access_profile
Syntax
Description
Parameters
Restrictions
Example usage:
To display all of the currently configured access profiles on the Switch:
DAS-3626:admin#show access_profile
Command: show access_profile
Access Profile Table
Total Unused Rule Entries: 1023
Total Used Rule Entries
Access Profile ID: 5
================================================================================
Profile Name:5
Owner : ACL
MASK Option :
VLAN Source MAC
00-00-00-00-00-01
----------- -----------------
================================================================================
Unused Entries: 1023
DAS-3626:admin#
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
show access_profile {profile_id <value 1-12>| profile_name <name 1-32 >}
This command is used to display the currently configured access profiles.
profile_id <value 1-12> – Specify the profile id to display only the access rules configuration
for a single profile ID. The user may enter a profile ID number between 1 and 12, yet,
remember only 12 access profiles can be created on the Switch
profile_name <name 1-32> – Specifies the name of the profile. The maximum length is 32
characters.
None.
:1
Destination MAC
00-00-00-00-00-02
----------------- ------
Type : Ethernet
802.1P Ethernet Type
-------------
406