Table of Contents
Advertisement
configure qinq
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure Q-in-Q:
DAS-3626:admin#config qinq v2 add uplink 25-26
Command: config qinq v2 add uplink 25-26
Success.
DAS-3626:admin#
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Used to configure Q-in-Q.
config qinq <vlan_name> {[add [uplink|access] | delete ] <portlist> | tpid <hex 0x0-
0xffff> | 802.1p [<priority 0-7> | none] }(1)
This command is used to configure the Q-in-Q VLAN mode for ports, include:
port role in double tag VLAN mode, 802.1P and port outer TPID.
<vlan_name> − vlan name
add − Port role in Q-in-Q mode, it can be either access port or uplink port.
access –
uplink –
tpid – Allows the interoperation with devices on a public network by specifying ports.
802.1p − Specify whether to use the priority in the SP-VLAN tag.
Only Administrator and Operator-level users can issue this command. You must be in the Q-
in-Q mode.
154
Advertisement
Table of Contents
