D-Link DAS-3636 Cli Reference Manual page 287

Example usage:
To configure 802.1p default priority on the Switch:
DAS-3626:admin#config 802.1p default_priority all 5
Command: config 802.1p default_priority all 5
Success.
DAS-3626:admin#
show 802.1 default_priority
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the current 802.1p default priority configuration on the Switch:
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Used to display the currently configured 802.1p priority value that will be assigned to an
incoming, untagged packet before being forwarded to its destination.
show 802.1p default_priority {<portlist>}
This command is used to display the currently configured 802.1p priority value that will be
assigned to an incoming, untagged packet before being forwarded to its destination.
<portlist> − Specifies a port or range of ports to be configured.
None.
282