D-Link DAS-3636 Cli Reference Manual page 172

Example usage:
To display the router ports.
DAS-3626:admin#show router_ports all
Command: show router_ports all
VLAN Name
Static router port
Dynamic router port
Router IP
Forbidden router port
VLAN Name
Static router port
Dynamic router port
Router IP
Forbidden router port
VLAN Name
Static router port
Dynamic router port
Router IP
Forbidden router port
Total Entries: 3
DAS-3626:admin#
show igmp_snooping group
Purpose
Syntax
Description
Parameters
Restrictions
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
: default
:
:
:
:
: v1
:
:
:
:
: RG
:
:
:
:
Used to display the current IGMP snooping configuration on the Switch.
show igmp_snooping group {[vlan <vlan_name 32> | vlanid <vidlist> | ports <portlist>]
{<ipaddr>}} {data_driven}
This command will display the current IGMP setup currently configured on the Switch.
<vlan_name 32> − The name of the VLAN for which to view IGMP snooping group
information.
<vlanid_list> − The VIDs of the VLAN for which to view IGMP snooping group information.
<portlist> − The list of ports for which to view IGMP snooping group information.
<ipaddr> − To view the information of this specified group.
data_driven – To view the groups learnt by data driven only.
If no parameter is specified, the system will display all current IGMP snooping groups.
None.
167