D-Link DAS-3636 Cli Reference Manual page 60

Example usage:
To create a multicast filter profile:
DAS-3626:admin#create mcast_filter_profile ipv4 profile_id 2 profile_name RG
Command: create mcast_filter_profile ipv4 profile_id 2 profile_name RG
Success.
DAS-3626:admin#
config mcast_filter_profile
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To config an IPv4 multicast filter profile:
DAS-3626:admin#config mcast_filter_profile profile_id 2 add 225.1.1.1-225.1.1.1
Command: config mcast_filter_profile profile_id 2 add 225.1.1.1
Success.
DAS-3626:admin#
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
This command adds or deletes a range of multicast addresses to the profile.
config mcast_filter_profile [profile_id < value 1-60>| profile_name <name 1-32> ]
{ profile_name <name 1-32> | [add | delete ] <mcast_address_list>}
This command allows the user to add or delete a range of multicast IP addresses previously
defined.
profile_id − ID of the profile. The range is 1 to 60.
profile_name − Provides a meaningful description for the profile.
mcast_address_list − List of the multicast addresses to be put in the profile.
You can either specifiy a single multicast IP address or a range of multicast addresses using.
Only Administrator and Operator-level users can issue this command.
55