D-Link DAS-3636 Cli Reference Manual page 156

enable qinq
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable Q-in-Q:
DAS-3626:admin#enable qinq
Command: enable qinq
Success.
DAS-3626:admin#
disable qinq
Purpose Used to disable the Q-in-Q mode.
Syntax disable qinq
Description This command is used to disable the Q-in-Q mode.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To disable Q-in-Q:
DAS-3626:admin#disable qinq
Command: disable qinq
Success.
DAS-3626:admin#
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Used to enable Q-in-Q mode.
enable qinq
This command enables Q-in-Q mode.
None.
Only Administrator and Operator-level users can issue this command.
151