Table of Contents
Advertisement
reboot
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To restart the Switch:
DAS-3626:admin#reboot
Command: reboot
Are you sure you want to proceed with the system reboot? (y|n)y
Please wait, the switch is rebooting...
reset
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To restore all of the Switch's parameters to their default values:
DAS-3626:admin#reset config
Command: reset config
Are you sure you want to proceed with system reset?(y/n)y
Success.
DAS-3626:admin#
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Used to restart the Switch.
Reboot {force_agree}
This command is used to restart the Switch.
force_agree − When force_agree is specified, the reboot command will be executed
immediatedly without further confirmation.
Only Administrator-level users can issue this command.
Used to reset the Switch to the factory default settings.
reset {[config |system]} {force_agree}
This command is used to restore the Switch's configuration to the default settings assigned
from the factory.
config − If the keyword 'config' is specified, all of the factory default settings are restored on
the Switch including the IP address, user accounts, and the switch history log. The Switch will
not save or reboot.
system − If the keyword 'system' is specified all of the factory default settings are restored on
the Switch. The Switch will save and reboot after the settings are changed to default.
Rebooting will clear all entries in the Forwarding Data Base.
force_agree − When force_agree is specified, the reset command will be executed
immediatedly without further confirmation.
If no parameter is specified, the Switch's current IP address, banner, user accounts, and the
switch history log are not changed. All other parameters are restored to the factory default
settings. The Switch will not save or reboot.
Only Administrator-level users can issue this command.
26
Advertisement
Table of Contents
