DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
download
Purpose
Used to download and install new firmware or a Switch configuration file from a TFTP server.
Syntax
download [ firmware_fromTFTP [<ipaddr> |<ipv6addr>] <path_filename 64> {image_id
<int 1-2>} | cfg_fromTFTP [<ipaddr> |<ipv6addr>] <path_filename 64> ]
Description
This command is used to download a new firmware or a Switch configuration file from a
TFTP server.
firmware_fromTFTP − Download and install new firmware on the Switch from a TFTP server.
Parameters
cfg_fromTFTP − Download a switch configuration file from a TFTP server.
<ipaddr> − The IP address of the TFTP server.
<ipv6addr> − The IPv6 address of the TFTP server.
<path_filename> − The DOS path and filename of the firmware or switch configuration file on
the TFTP server. For example, C:\3700.had.
image_id <int 1-2> − Specify the working section ID. The Switch can hold two firmware
versions for the user to select from, which are specified by section ID.
increment − Allows the download of a partial switch configuration file. This allows a file to be
downloaded that will change only the switch parameters explicitly stated in the configuration
file. All other switch parameters will remain unchanged.
36