Table of Contents
Advertisement
config ssh user
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the SSH user:
DAS-3626:admin#config ssh user Trinity authmode password
Command: config ssh user Trinity authmode password
Success.
DAS-3626:admin#
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Used to configure the SSH user.
config ssh user <username 15> authmode [hostbased [hostname <domain_name 32> |
hostname_IP <domain_name 32> <ipaddr >] | password | publickey]
This command is used to configure the SSH user authentication method.
<username 15> − Enter a username of no more than 15 characters to identify the SSH user.
authmode – Specifies the authentication mode of the SSH user wishing to log on to the
Switch. The administrator may choose between:
hostbased – This parameter should be chosen if the user wishes to use a remote SSH
server for authentication purposes. Choosing this parameter requires the user to input
the following information to identify the SSH user.
•
hostname <domain_name 32> − Enter an alphanumeric string of up to 32
characters identifying the remote SSH user.
•
hostname_IP <domain_name 32> <ipaddr> − Enter the hostname and the
corresponding IP address of the SSH user.
password – This parameter should be chosen to use an administrator defined password for
authentication.
publickey – This parameter should be chosen to use the publickey on a SSH server for
authentication.
Only Administrator-level users can issue this command.
323
Advertisement
Table of Contents
