Table of Contents
Advertisement
Example usage:
To delete a CFM linktrace:
DAS-3626:admin#delete cfm linktrace mep mep1
Command: delete cfm linktrace mep mep1
Success.
DAS-3626:admin#
config cfm ccm_fwd
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the CFM ccm forwarding mode:
DAS-3626:admin#config cfm ccm_fwd_mode hardware
Command: config cfm ccm_fwd_mode hardware
Success.
DAS-3626:admin#
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
This command is used to configure CCM PDUs forwarding mode.
config cfm ccm_fwd [software | hardware]
This coommand is for test purposes. For ordinary user, it is not suggested to use this
command.
By default, the CCM message is handled and forwarded by software. The software can
handle the packet based on behaviour defined by the standard. Under a strict environment,
there may be substantial amount of CCM packets, and it will consume substantial amount of
CPU resource. To meet the performance requirement, the handling of CCM can be changed
to hardware mode. This function is especially useful for domain's intermediate device since
they only have MIPS. Note that this command can only be used under assistance of technical
personnel.
software – Specifies to forward by software.
hardware – Specifies to forward by hardware.
Only Administrator and Operator-level users can issue this command.
269
Advertisement
Table of Contents
