Vlan Commands - D-Link DAS-3636 Cli Reference Manual

The VLAN commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following
table.
Command
create vlan
create vlan vlanid
delete vlan
delete vlan vlanid
config vlan
config vlan vlanid
config port_vlan
enable gvrp
disable gvrp
show vlan
show port_vlan
create dot1v_protocol_group
config dot1v_protocol_group
config dot1v_protocol_group
delete dot1v_protocol_group
show dot1v_protocol_group
config port dot1v ports
show port dot1v
enable pvid auto_assign
disable pvid auto_assign
show pvid auto_assign
config gvrp
show gvrp
Each command is listed, in detail, in the following sections.
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Parameters
< vlan_name 32> tag <vlanid 2-4094> {type 1q_vlan advertisement}
<vidlist> { advertisement }
<vlan_name 32>
<vidlist>
<vlan_name 32> {[add [tagged | untagged | forbidden] | delete] <portlist> |
advertisement [enable | disable]}
<vidlist> { [ add [ tagged | untagged | forbidden ] | delete ] <portlist> |
advertisement [ enable | disable ]| name <vlan_name>}
[<portlist> | all] { gvrp_state [enable | disable]|ingress_checking [enable |
disable] |acceptable_frame[tagged_only | admit_all] | pvid<vlanid 1-4094> }
<vlan_name 32> | vlanid < vidlist > | ports <portlist>
<portlist>
group_id <id 1-16> {group_name <name 32>}
[group_id < id 1-16> | group_name <name 32> ] add protocol [ethernet_2|
ieee802.3_snap| ieee802.3_llc] < protocol_value>
[group_id < id 1-16> | group_name <name 32> ] delete protocol [ethernet_2 |
ieee802.3_snap |
ieee802.3_llc] < protocol_value>
[group_id <id 1-16> | group_name <name 32>| all]
{group_id <id 1-16> | group_name <name 32>}
[<portlist> | all] [add protocol_group [group_id <id 1-16> | group_name <name
32>] [vlan< vlan_name 32> | vlanid <id>] {priority <value 0-7>} | delete
protocol_group [group_id <id 1-16>|all]]
{ports <portlist>}
[timer [join | leave | leaveall] < value 100-100000> | nni_bpdu_addr [dot1d |
dot1ad]]
125
17
VLAN C
OMMANDS