Table of Contents
Advertisement
Example usage:
To config MLD multicast VLAN mv1:
DAS-3626:admin#config mld_snooping multicast_vlan mv1 add member_port
1,3 state enable
Command: config mld_snooping multicast_vlan mv1 add member_port 1,3
state enable
Success.
DAS-3626:admin#
create mld_snooping multicast_vlan_group_profile
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create an MLD multicast VLAN group profile "g1":
DAS-3626:admin#create mld_snooping multicast_vlan_group_profile g1
Command: create mld_snooping multicast_vlan_group_profile g1
Success.
DAS-3626:admin#
config mld_snooping multicast_vlan_group_profile
Purpose
Syntax
Description
Parameters
Restrictions
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Used to create an MLD multicast VLAN group profile on the switch.
create mld_snooping multicast_vlan_group_profile <profile_name 1-32>
This command is used to create an MLD multicast VLAN group profile. The profile name
used for mld snooping must be unique.
<profile_name 32> − Specifies the MLD multicast VLAN group profile name, max length is 32
Only Administrator and Operator-level users can issue this command.
Used to configure an MLD multicast VLAN group profile on the switch, to add or delete
multicast address for the profile.
config mld_snooping multicast_vlan_group_profile <profile_name 1-32> [add | delete]
<mcast v6_address_list>
This command configures an MLD multicast VLAN group profile on the switch, and can add
or delete multicast addresses for the profile.
<profile_name 32> − Specifies the MLD multicast VLAN group profile name, max length is
32.
[add | delete] – Add or delete MLD multicast address list to or from this multicast VLAN group
profile
<mcastv6_address_list> – Specifies the MLD multicast addresses to be configured. It can be
a continuous single multicast addresses, such as FF12::1, FF12::3, FF12::8, or a multicast
address range, such as FF12::1- FF12::12, or both of them, such as FF12::1, FF12::18-
FF12::20.
Only Administrator and Operator-level users can issue this command.
185
Advertisement
Table of Contents
