D-Link DAS-3636 Cli Reference Manual page 250

show stp instance_id
Purpose Used to display the Switch's STP instance configuration
Syntax show stp instance_id <value 0-15>
Description This command displays the Switch's current STP Instance Settings and the STP Instance
Operational Status.
<value 0-15> − Enter a value defining the previously configured instance_id on the Switch. An entry
Parameters
of 0 will display the STP configuration for the CIST internally set on the Switch.
Restrictions None.
Example usage:
To display the STP instance configuration for instance 0 (the internal CIST) on the Switch:
DAS-3626:admin#show stp instance 0
Command: show stp instance 0
STP Instance Settings
---------------------------
Instance Type
Instance Status
Instance Priority
STP Instance Operational Status
--------------------------------
Designated Root Bridge : 4096 /00-11-95-AA-41-00
External Root Cost
Regional Root Bridge
Internal Root Cost
Designated Bridge
Root Port
Max Age
Forward Delay
Last Topology Change
Topology Changes Count : 21
DAS-3626:admin#
show stp mst_config_id
Purpose Used to display the MSTP configuration identification.
Syntax show stp mst_config_id
Description This command displays the Switch's current MSTP configuration identification.
Parameters None.
Restrictions None.
Example usage:
To show the MSTP configuration identification currently set on the Switch:
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
: CIST
: Enabled
: 32768(Bridge Priority : 32768, SYS ID Ext : 0 )
: 200004
: 32768/00-01-02-03-04-00
: 0
: 32768/00-50-BA-97-D9-56
: 7
: 20
: 15
: 0
245