D-Link DAS-3636 Cli Reference Manual page 434

config vdsl profile RaMode
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To config vdsl profile rate adaptive mode
DAS-3626:admin#config vdsl profile name default RaMode decrease
Command: config vdsl profile name default RaMode decrease
Success.
DAS-3626:admin#
config vdsl profile [MaxTxRate|MaxRxRate|MinTxRate|MinRxRate]
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To config vdsl profile maximum and minimum RX/TX rate
DAS-3626:admin#config vdsl profile name default MaxTxRate 50000
Command: config vdsl profile name default MaxTxRate 50000
Success.
DAS-3626:admin#
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Used to config vdsl profile rate adaptive mode
config vdsl profile [<profile_id 1-60>|name <profile_name 32>] RaMode [decrease|increase-
decrease]
This command is used to rate adaptive mode.
<profile_id 1-60>–The profile ID of the profile to be configed
name <profile_name 32>–The name of the profile to be configed
RaMode–To config VDSL profile rate adaptive mode
decrease–The vdsl line will retrain if line condition is below minimum SNR.

 increase-decrease– The vdsl line will retrain if line condition is above
maximum SNR or below minimum SNR.
Only Administrator-level users can issue this command.
Used to config vdsl profile maximum and minimum RX/TX rate
config vdsl profile [<profile_id 1-60>|name <profile_name 32>] [MaxTxRate|MaxRxRate|
MinTxRate|MinRxRate] <vdsl_speed 32-104960>
This command is used to rate adaptive mode.
<profile_id 1-60>–The profile ID of the profile to be configed
name <profile_name 32>–The name of the profile to be configed
[MaxTxRate|MaxRxRate|MinTxRate|MinRxRate]–To config VDSL profile maximum and
minimum RX/TX rate
 <vdsl_speed 32-104960>–vdsl speed minimum is 32kbps,maximum is
104960kbps.The scale is 1 kbps
Only Administrator-level users can issue this command.
429