D-Link DAS-3636 Cli Reference Manual page 58

show ipv6 nd
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the neighbor detection parameters for IPv6:
DAS-3626:admin#show ipv6 nd
Command: show ipv6 nd
Interface Name
NS Retransmit Time
DAS-3626:admin#
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Used to display information regarding Neighbor Detection on the switch.
show ipv6 nd {ipif <ipif_name 12>}
This command is used to show information regarding the IPv6 Neighbor
Detection function of the switch. Users may specify an IP interface for which to view this
information.
<ipif_name 12> – Enter the IP interface of the IPv6 interface for which to
view this information. Omitting this parameter will display all information
regarding neighbor detection currently set on the switch.
Only Administrator-level users can issue this command.
: System
: 1000000 (ms)
53