D-Link DAS-3636 Cli Reference Manual page 277

Example usage:
To clear the CFM packet RX/TX counters:
DAS-3626:admin#clear cfm pkt_cnt ports 2 rx
Command: clear cfm pkt_cnt ports 2 rx
Success.
DAS-3600-12:4#
config cfm mp_ltr_all
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure CFM mp linktrace:
DAS-3626:admin#config cfm mp_ltr_all enable
Command: config cfm mp_ltr_all enable
Success.
DAS-3600-12:4#
show cfm mp_ltr_all
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show the CFM mp linktrace on the Switch:
DAS-3600-12:4#show cfm mp_ltr_all
Command: show cfm mp_ltr_all
All MPs reply LTRs: Enabled
DAS-3600-12:4#
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
To configure the CFM mp linktrace on the switch.
config cfm mp_ltr_all [enable | disable]
This command is used to configure the CFM mp linktrace on the switch.
enable – Used to enable the CFM mp linktrace.
disable – Used to disable the CFM mp linktrace.
Only Administrator and Operator-level users can issue this command.
To display the CFM mp linktrace settings on the switch.
show cfm mp_ltr_all
This command is used to display the CFM mp linktrace settings on the switch.
None.
None.
272