D-Link DAS-3636 Cli Reference Manual page 150

To delete protocol ipv6 from a protocol group 1:
DAS-3626:admin#config dot1v_protocol_group group_id 1 delete protocol
86DD
Command: config dot1v_protocol_group group_id 1 delete protocol
Success.
DAS-3626:admin#
delete dot1v_protocol_group
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete protocol group 1:
DAS-3626:admin#delete dot1v_protocol_group group_id 1
Command: delete dot1v_protocol_group group_id 1
Success.
DAS-3626:admin#
show dot1v_protocol_group
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the protocol group ID 1:
DAS-3626:admin#show dot1v_protocol_group group_id 1
Command: show dot1v_protocol_group group_id 1
Protocol Group ID
-----------------
1
Total Entries: 1
DAS-3626:admin#
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Delete a protocol group.
delete dot1v_protocol_group [group_id <id 1-16>| group_name <name 32>| all]
This command deletes a protocol group.
group_id − The id of protocol group which is used to identify a set of protocols.
group_name − The name of the protocol group. The maximum length is 32 characters.
Only Administrator and Operator-level users can issue this command.
Display the protocols defined in a protocol group.
show dot1v_protocol_group {group_id <id 1-16> | group_name <name 32>}
This command is used to display the protocols defined in protocol groups.
group_id − The id of protocol group which is used to identify a set of protocols.
group_name − The name of the protocol group. The maximum length is 32 characters.
None.
Protocol Group Name
--------------------
General Group
Frame Type Protocol Value
----------- ---------------
EthernetII
145
ethernet_2
ethernet_2 86DD
86DD