Table of Contents
Advertisement
Example usage:
To disable CFM:
DAS-3600-12:4# disable cfm
Command: disable cfm
Success.
DAS-3600-12:4#
config cfm ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure CFM ports:
DAS-3626:admin#config cfm ports 2-5 state enable
Command: config cfm ports 2-5 state enable
Success.
DAS-3626:admin#
show cfm ports
Purpose
Syntax
Description
Parameters
Restrictions
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Used to enable or disable CFM function on per-port basis.
config cfm ports <portlist> state [enable | disable]
By default, CFM function is disabled on all ports.
If CFM is disabled on a port:
•
MIPs are never created on that port.
•
MEPs can still be created on that port, and the configuration can be saved.
•
MEPs created on that port can never generate or process CFM PDUs. If the user
issues a Loop-back or Linktrace test on those MEPs, it will prompt user that CFM
function is disabled on that port.
ports – Specifies the logical port list.
state – Is used to enable or disable CFM function.
Only Administrator and Operator-level users can issue this command.
This command is used to show cfm state of specified ports.
show cfm ports <portlist>
This command is used to display CFM state of speicified ports.
ports – Specifies the logical port list.
None.
263
Advertisement
Table of Contents
