D-Link DAS-3636 Cli Reference Manual page 440

config vdsl profile [PSDBreakPointTx|PSDBreakPointRx]
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To config vdsl profile vdsl profile Downstream/Upstream PSD breakpoint
DAS-3626:admin#config vdsl profile name default PSDBreakPointTx 1 2 5
Command: config vdsl profile name default PSDBreakPointTx 1 2 5
Success.
DAS-3626:admin#
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Used to config vdsl profile Downstream/Upstream PSD breakpoint.
config vdsl profile [<profile_id 1-60>|name <profile_name 32>] [PSDBreakPointTx|
PSDBreakPointRx] [numpsd <int 0-32>
{frq <frq> psd_value <psd_value>} {frq <frq> psd_value <psd_value>}
{frq <frq> psd_value <psd_value>} {frq <frq> psd_value <psd_value>}
{frq <frq> psd_value <psd_value>} {frq <frq> psd_value <psd_value>}
{frq <frq> psd_value <psd_value>} {frq <frq> psd_value <psd_value>}
{frq <frq> psd_value <psd_value>} {frq <frq> psd_value <psd_value>}
{frq <frq> psd_value <psd_value>} {frq <frq> psd_value <psd_value>}
{frq <frq> psd_value <psd_value>} {frq <frq> psd_value <psd_value>}
{frq <frq> psd_value <psd_value>} {frq <frq> psd_value <psd_value>}
{frq <frq> psd_value <psd_value>} {frq <frq> psd_value <psd_value>}
{frq <frq> psd_value <psd_value>} {frq <frq> psd_value <psd_value>}
{frq <frq> psd_value <psd_value>} {frq <frq> psd_value <psd_value>}
{frq <frq> psd_value <psd_value>} {frq <frq> psd_value <psd_value>}
{frq <frq> psd_value <psd_value>} {frq <frq> psd_value <psd_value>}
{frq <frq> psd_value <psd_value>} {frq <frq> psd_value <psd_value>}
{frq <frq> psd_value <psd_value>} {frq <frq> psd_value <psd_value>}
{frq <frq> psd_value <psd_value>} {frq <frq> psd_value <psd_value>}]
This command is used to config vdsl profile Downstream/Upstream PSD breakpoint.
<profile_id 1-60>–The profile ID of the profile to be configed
name <profile_name 32>–The name of the profile to be configed
[PSDBreakPointTx|PSDBreakPointRx]–To config VDSL profile Downstream/Upstream PSD
breakpoint.
numpsd–Number of breakpoints
frq–Specifies the Downstream/Upstream Tone Index for which we need to change the PSD
value
psd_value–PSD value is in terms of (-140 + X*dBStep)dBm/Hz) with 0.5 dB Step
Only Administrator-level users can issue this command.
435