D-Link DAS-3636 Cli Reference Manual page 30

Command: enable web 80
Success.
DAS-3626:admin#
disable web
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable HTTP:
DAS-3626:admin#disable web
Command: disable web
Success.
DAS-3626:admin#
save
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To save the Switch's current configuration to non-volatile RAM:
DAS-3626:admin#save
Command: save
Saving all configurations to NV-RAM...
DAS-3626:admin#
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Used to disable the HTTP-based management software on the Switch.
disable web
This command disables the Web-based management software on the Switch.
None.
Only Administrator and Operator-level users can issue this command.
Used to save changes in the Switch's configuration to non-volatile RAM.
save {[config <config_id 1-2> | log | all]}
This command is used to enter the current switch configuration into non-volatile RAM. The
saved switch configuration will be loaded into the Switch's memory each time the Switch is
restarted.
config <config_id 1-2> – Specify to save current settings to configuration file 1 or 2.
log – Specify to save current Switch log to NV-RAM.
all – Specify to save all configuration settings. If nothing is specified after "save", the Switch
will save all current configuration to non-volatile RAM.
Only Administrator and Operator-level users can issue this command.
Done.
25