Command Syntax - D-Link DAS-3636 Cli Reference Manual

The following symbols are used to describe how command entries are made and values and arguments are specified in this
manual. The online help contained in the CLI and available through the console interface uses the same syntax.
<angle brackets>
Purpose
Syntax
Description
Example
Command
[square brackets]
Purpose
Syntax
Description
Example
Command
| vertical bar
Purpose
Syntax
Description
Example
Command
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Note: All commands are case-sensitive. Be sure to disable Caps Lock or
any other unwanted function that changes text case.
Encloses a variable or value that must be specified.
config ipif <ipif_name 12> [{ipaddress <network_address> |vlan <vlan_name 32> |state
[enable |disable]} | bootp |dhcp | ipv6 [ipv6address <ipv6networkaddr> | state [enable|
disable]] |ipv4 state [enable | disable]]
In the above syntax example, users must supply an IP interface name in the <ipif_name 12>
space, a VLAN name in the <vlan_name 32> space, and the network address in the
<network_address> space. Do not type the angle brackets.
config ipif Engineering ipaddress 10.24.22.5/255.0.0.0 vlan Design state enable
Encloses a required value or set of required arguments. One value or argument can be
specified.
create account [admin | operator | user] <username 15>
In the above syntax example, users must specify either an admin or a user level account to
be created. Do not type the square brackets.
create account admin Tommy
Separates two or more mutually exclusive items in a list, one of which must be entered.
create account [admin | operator | user] <username 15>
In the above syntax example, users must specify either admin, or user. Do not type the
backslash.
create account admin Tommy
6
C S
OMMAND YNTAX
3