D-Link DAS-3636 Cli Reference Manual page 109

DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
show snmp host
Purpose Used to display the recipient of SNMP traps generated by the Switch's SNMP agent.
Syntax show snmp host {<ipaddr>}
Description This command is used to display the IP addresses and configuration information of remote
SNMP managers that are designated as recipients of SNMP traps that are generated by the
Switch's SNMP agent.
<ipaddr> − The IP address of a remote SNMP manager that will receive SNMP traps
Parameters
generated by the Switch's SNMP agent.
104