D-Link DAS-3636 Cli Reference Manual page 399

Example usage:
To display the DHCP server filter list created on the switch:
DAS-3626:admin#show filter dhcp_server
Command: show filter dhcp_server
Enabled Ports: 1-3
Filter DHCP Server/Client Table
Server IP Address
-----------------
10.255.255.254
Total Entries: 1
DAS-3626:admin#
config filter netbios
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the NetBIOS state:
DAS-3626:admin#config filter netbios 1-10 state enable
Command: config filter netbios 1-10 state enable
Success.
DAS-3626:admin#
show filter netbios
Purpose
Syntax
Description
Parameters
Restrictions
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Client MAC Address
------------------
00-00-00-00-00-01
Used to configure the switch to filter NetBIOS packets from specified ports.
config filter netbios [<portlist> | all] state [enable|disable]
This command will configure the switch to filter NetBIOS packets from the specified ports.
[<portlist>|all] – The list of port numbers to which the NetBIOS filter will be applied.
state [enable|disable] – Used to enable/disable the NetBIOS filter on the switch.
Only Administrator-level users can issue this command.
Enabling the NetBIOS filter will create one access profile and three access rules per port
(UDP port number 137 and 138, and TCP port 139).
Used to display the switch settings to filter NetBIOS packets from specified ports.
show filter netbios
This command will display the switch settings to filter NetBIOS packets from the specified
ports.
None.
Only Administrator-level users can issue this command.
Port
-------------
1-12
394