D-Link DAS-3636 Cli Reference Manual page 168

config igmp_snooping querier
Restrictions
Example usage:
To configure the IGMP snooping querier:
DAS-3626:admin#config igmp_snooping querier vlan default query_interval 125 state enable
Command: config igmp_snooping querier vlan default query_interval 125 state enable
Success.
DAS-3626:admin#
config router_ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To set up static router ports:
DAS-3626:admin#config router_ports vlan default add 1-10
Command: config router_ports vlan default add 1-10
Success.
DAS-3626:admin#
config router_ports_forbidden
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Only Administrator or Operator-level users can issue this command.
Used to configure ports as router ports.
config router_ports [vlan <vlan_name 32> | vlanid <vidlist>]
This command allows users to designate a range of ports as being connected to multicast-
enabled routers. This will ensure that all packets with such a router as its destination will
reach the multicast-enabled router − regardless of protocol, etc.
<vlan_name 32> − The name of the VLAN on which the router port resides.
<vid_list> – The VIDs of the VLAN on which the router port resides.
[add|delete] – Specifies whether to add or delete router ports of the specified VLAN.
<portlist> − Specifies a port or range of ports that will be configured as router ports.
Only Administrator and Operator-level users can issue this command.
Used to configure ports as forbidden multicast router ports.
config router_ports_forbidden [vlan <vlan_name 32> | vlanid <vidlist>] [add|delete]
<portlist>
This command allows designation of a port or range of ports as being forbidden to multicast-
enabled routers. This will ensure that multicast packets will not be forwarded to this port −
regardless of protocol, etc.
<vlan_name 32> − The name of the VLAN on which the router port resides.
<vid_list> − The VIDs of the VLAN on which the forbidden router port resides.
[add | delete] − Specifies whether to add or delete forbidden router ports of the specified
VLAN.
<portlist> − Specifies a range of ports that will be configured as forbidden router ports.
Only Administrator and Operator-level users can issue this command.
163