D-Link DAS-3636 Cli Reference Manual page 477

To display the parameters for a specific command:
DAS-3626:admin#? config stp
Command: ? config stp
Command: config stp
Usage: {maxage <value 6-40>|maxhops <value 1-20> |hellotime <value 1-2>|
forwarddelay <value 4-30>|txholdcount <value 1-10>|fbpdu [enable|disable]|
nni_bpdu_addr [dot1d | dot1ad]}
Description: Used to update the STP Global Configuration.
config stp instance_id
config stp mst_config_id
config stp mst_ports
config stp ports
config stp priority
config stp version
DAS-3626:admin#
config command_history
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the command history:
DAS-3626:admin#config command_history 20
Command: config command_history 20
Success.
DAS-3626:admin#
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Used to configure the command history.
config command_history <value 1-40>
This command is used to configure number of the executed command to be recorded in CLI.
<value 1-40> − The number of previously executed commands maintained in the buffer. Up
to 40 of the latest executed commands may be viewed.
None.
472