D-Link DAS-3636 Cli Reference Manual page 202

Example usage:
To show MLD snooping group on the switch:
DAS-3626:admin#show mld_snooping group
Command: show mld_snooping group
Source/Group
VLAN Name/VID
Member Ports
UP Time
Expiry Time
Filter Mode
Total Entries : 1
DAS-3626:admin#
show mld_snooping mrouter_ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the router ports on the switch:
DAS-3626:admin#show mld_snooping mrouter_ports all
Command: show mld_snooping mrouter_ports all
VLAN Name
Static router port
Dynamic router port
Router IP
Forbidden router port
Total Entries: 1
DAS-3626:admin#
show mld_snooping rate_limit
Purpose
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
: 2001::2/FF1E::1
: default/1
: 12
: 2
: 258
: INCLUDE
Used to display the currently configured router ports on the switch.
show mld_snooping mrouter_ports [vlan <vlan_name 32> | vlanid <vidlist> |all ]
{[static|dynamic|forbidden]}
This command is used to display the currently configured router ports on the switch.
vlan_name − The name of the VLAN for which you want to view the MLD snooping
configuration.
vid list – The VIDs of the VLAN for which you want to view the MLD snooping configuration.
all – All the MLD router ports will be displayed.
static − Displays router ports that have been statically configured.
dynamic − Displays router ports that have been dynamically configured.
forbidden − Displays forbidden router ports that have been statically configured.
If no parameter specified, the system will display all currently configured router ports on the
switch.
None.
: default
:
:
:
:
Used to show rate limitation.
197