Table of Contents
Advertisement
To disable SNTP support:
DAS-3626:admin#disable sntp
Command: disable sntp
Success.
DAS-3626:admin#
config time
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To manually set system time and date settings:
DAS-3626:admin#config time 30jun2003 16:30:30
Command: config time 30jun2003 16:30:30
Success.
DAS-3626:admin#
config time_zone
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure time zone settings:
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Used to manually configure system time and date settings.
config time <date ddmmmyyyy> <time hh:mm:ss>
This command will configure the system time and date settings. These will be overridden if
SNTP is configured and enabled.
date – Express the date using two numerical characters for the day of the month, three
alphabetical characters for the name of the month, and four numerical characters for the
year. For example: 03aug2003.
time – Express the system time using the format hh:mm:ss, that is, two numerical characters
each for the hour using a 24-hour clock, the minute and second. For example: 19:42:30.
Only Administrator and Operator-level users can issue this command. Manually configured
system time and date settings are overridden if SNTP support is enabled.
Used to determine the time zone used in order to adjust the system clock.
config time_zone {operator [+ | -] | hour <gmt_hour 0-13> | min <minute 0-59>}
This command will adjust system clock settings according to the time zone. Time zone
settings will adjust SNTP information accordingly.
operator – Choose to add (+) or subtract (-) time to adjust for time zone relative to GMT.
hour – Select the number of hours different from GMT.
min – Select the number of minutes difference added or subtracted to adjust the time zone.
Only Administrator and Operator-level users can issue this command.
122
Advertisement
Table of Contents
