D-Link DAS-3636 Cli Reference Manual page 68

show ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the configuration of all ports on a standalone switch:
DAS-3626:admin#show ports
Command: show ports
Port Port
State
------- --------
1 Enabled
2 Enabled
3 Enabled
4 Enabled
5 Enabled
6 Enabled
7 Enabled
8 Enabled
9 Enabled
10 Enabled
11 Enabled
12 Enabled
Notes:(F)indicates fiber medium and (C)indicates copper medium in a combo port
DAS-3626:admin#
Example usage:
To display the configuration of all ports on a standalone switch, with description.
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Used to display the current configuration of a range of ports.
show ports {<portlist>} { [description | err_disabled] }
This command is used to display the current configuration of a range of ports.
<portlist> − Specifies a port or range of ports to be displayed.
description – Adding this parameter to the show ports command indicates that a previously
entered port description will be included in the display.
err_disabled – Use this to list disabled ports including connection status and reason for being
disabled.
None.
Settings
Speed/Duplex/FlowCtrl
---------------------
Auto/Disabled
Auto/Disabled
Auto/Disabled
Auto/Disabled
Auto/Disabled
Auto/Disabled
Auto/Disabled
Auto/Disabled
Auto/Disabled
Auto/Disabled
Auto/Disabled
Auto/Disabled
Connection
Speed/Duplex/FlowCtrl
----------------------
Link Down
Link Down
VDSL/None
Link Down
Link Down
Link Down
VDSL/None
Link Down
Link Down
Link Down
Link Down
Link Down
63
Address
Learning
---------
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled