D-Link DAS-3636 Cli Reference Manual page 47

Example usage:
To upload a configuration file:
DAS-3626:admin#upload cfg_toTFTP 10.48.74.121 c:\cfg\configuration.txt
Command: upload cfg_toTFTP 10.48.74.121 c:\cfg\configuration.txt
Connecting to server................... Done.
Upload configuration...................Done.
DAS-3626:admin#
ping
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To ping the IP address 10.48.74.121 four times:
DAS-3626:admin#ping 10.48.74.121 times 4
Command: ping 10.48.74.121
Reply from 10.48.74.121, time<10ms
Reply from 10.48.74.121, time<10ms
Reply from 10.48.74.121, time<10ms
Reply from 10.48.74.121, time<10ms
Ping statistics for 10.48.74.121
Packets: Sent =4, Received =4, Lost =0
DAS-3626:admin#
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Used to test the connectivity between network devices.
ping <ipaddr> {times <value 1-255>} {timeout <sec 1-99>} {size <value 32-1500>}
This command is used to send Internet Control Message Protocol (ICMP) echo messages to
a remote IP address. The remote IP address will then "echo" or return the message. This is
used to confirm connectivity between the Switch and the remote device.
<ipaddr> - Specifies the IP address of the host.
times <value 1-255> - The number of individual ICMP echo messages to be sent. A value of
0 will send an infinite ICMP echo messages. The maximum value is 255. The default is 0.
timeout <sec 1-99> - Defines the time-out period while waiting for a response from the
remote device. A value of 1 to 99 seconds can be specified. The default is 1 second.
size <value 32-1500> - Defines the packet size.
None.
42